CA80 BMW R80-R100-GS Plug-and-Play : 100mm diameter speedometer to fit BMW R80 R100 GS G/S Plug and Play

Plug-and-play 100mm speedometer for the BMW R80 and R100 GS and G/S, offered with a range of MPH and RPM scales and designed to fit the original headlight binnacle.

The speed sensor, power and RPM connections plug straight in. The warning lamps can be connected too, but must be piggy-backed onto the wires feeding the original lamps.

Check the binnacle shape in the photos - if yours is different it won't fit. On binnacles with the speedo and rev counter side by side it won't plug and play; it must be hard wired and needs the optional 103mm mounting ring.

The connector used is the one the original rev counter plugs into. To keep the original electronic rev counter as well, choose the optional loop-through connector, which gives a male and a female round 4-pin plug.

Scale options

• 120 MPH and 12000RPM
• 120MPH, 190KM/H and 12000RPM
• 190KM/H, 120MPH and 12000RPM

Features include

• Needle speedometer / rev counter - choose below
• Needle primary scale in white print
• Secondary scale in white print (does not illuminate)
• Digital speedometer up to 186mph / 399.9 km/h
• 2 trip meters TRIP 1 + 2
• Odometer (Total mileage)
• Digital speed display to 19,900 RPM
• Display average and maximum speeds
• Display maximum RPM
• Digital Temperature gauge and max temperature display (C/F)
• Clock
• Voltmeter
• Travel time (one resettable and one non-resettable)
• Engine hour meter
• LCD adjustable backlight colour (3 levels of red, green, blue) comes on with ignition
• Analogue scale backlight switched independently from LCD
• Clock shown in standby mode with ignition off
• Adjustable wheel circumference for all types of wheels. Setting range 1-3999 mm
• Compatible with cable drive / gearbox electric speed sensors and magnet pickups
• Kilometers or miles
• When new, and until odometer reaches 18 miles / 30km the odometer can be edited to enter reading from a previous speedometer
• Maintenance reminder
• Water resistant, vibration and shockproof ( 8G vibration , shock 100G tested )
• E- certified
• Cables harness tails to plug-and-play to the bike
• ACE-S11 gearbox sensor to connect to BMW R2 gearboxes
• CNC Bezel (top ring) to fit into original binnacle

Dimensions

• Total depth 47mm